Product categories
Selected pack
التخطي إلى معلومات المنتج
PC4-M5 Straight Pneumatic Fitting - 4mm Tube, M5 x 0.8
$0.46
One complete PC straight male pneumatic fitting per base unit. Match tubing outside diameter and the supplied thread designation before ordering. Tubing and equipment are sold separately.
Applications & specifications · Quick order all packs
Ships from China · 5–7 calendar days preparation. Shipping · Returns
Route an air line to a threaded port.
PC4-M5 Straight Pneumatic Fitting - 4mm Tube, M5 x 0.8 connects compatible 4 mm outside-diameter pneumatic tubing to a matching female-threaded equipment port. The straight layout suits compatible valves, air preparation equipment and general automation air lines.
One fitting, one selected model
Each base sales unit contains one complete PC4-M5 fitting. Release ring, gripping collet and supplied seals are part of the assembled fitting, not extra loose pieces. Tubing, equipment, thread sealant and installation tools are excluded.
Use tubing outside diameter to select the push-in end. Check the actual mating thread profile and installation clearance before ordering; nominal inch size alone does not establish compatibility.
Model & Reference Codes
| Original single-unit SKU | PC4-M5 |
|---|---|
| Series / fitting form | PC straight male push-in pneumatic fitting |
| Tube outside diameter | 4 mm |
| Supplied thread designation | M5 x 0.8 |
| Approx. overall height | 18 mm |
| Approx. hex width | 10 mm |
| Approx. threaded section | 4.5 mm |
| Approx. thread outside diameter | 4.9 mm |
| Body / release ring | Brass body / blue release ring |
| Sales unit | 1 complete fitting; supplied collet and seals remain assembled |
| Unit weight | 0.0035 kg |
Dimensions are approximate supplier values from the original model-specific image, not a tolerance-controlled production drawing. PT is retained exactly as the supplier marks it; it is not an NPT designation. Check the actual mating port before installation.
Connect, check, then operate.
Isolate the air supply and fully depressurize the line. Confirm tubing material and operating conditions suit the installation. Cut the tubing square and remove debris. Tighten the threaded connection at the brass hex using a suitable method for the mating port; do not use the release ring as a wrench point.
Push the tube fully into the connection and gently pull back to check retention. Restore air gradually and check the joint for leakage. To remove tubing, depressurize first, press the release ring evenly, then withdraw the tube. No unverified insertion depth, tightening torque or pressure rating is implied.
Pack quantities
Select 1 / 10 / 100 fittings per pack, all the same model. Quantity counts packs: 2 packs of 10 contain 20 fittings. The pack prices already include the shown quantity savings.
0
إجمالي العناصر
الإجمالي الفرعي للمنتج
يتم حساب الضرائب والخصومات والشحن عند إتمام الدفع.
Find your matching configuration
Male Thread Fittings (PC)
Compare the actual connection: blue-ring push-in, compression nut, stainless push-in, hose barb or fixed boxed assortment. Match size and supplied thread.
Blue-Ring Push-In Fittings 20Metric Straight Push-In 18Nickel-Plated Quick-Screw Fittings 36304 Stainless Push-In Fittings 20Brass Hose Barb Fittings 20PC Boxed Assortments 4
Blue-Ring Push-In Fittings (20)
PC4 · 4 mm tube OD (3)
PC6 · 6 mm tube OD (5)
PC8 · 8 mm tube OD (4)
PC10 · 10 mm tube OD (4)
PC12 · 12 mm tube OD (4)
Metric Straight Push-In (18)
Nickel-Plated Quick-Screw Fittings (36)
PC4 · 4 mm tube OD (5)
PC6 · 6 mm tube OD (10)
PC8 · 8 mm tube OD (13)
