PPF-10 Pneumatic Push-In Tube End Cap - 10mm Tube OD

Product categories

PPF-10 | Complete sales unit - original aspect ratio

PPF-10 Pneumatic Push-In Tube End Cap - 10mm Tube OD

$0.79

One complete PPF push-in tube end cap with a blue release collar and a closed end. Match the tube outside diameter. Tubing and separate insert plugs are not included.

Applications & specifications · Quick order all packs

Ships from China · 5–7 calendar days preparation. Shipping · Returns

PPF-10 Pneumatic Push-In Tube End Cap - 10mm Tube OD

A PPF end cap accepts one compatible pneumatic tube and closes its end. Match the tube outside diameter to the selected cap. The blue collar releases the tube after full depressurization.

Included in one sales unit

1 complete assembled PPF end cap. Tubing, PP insert plugs, other caps, equipment, tools and storage boxes are not included.

Clean single-cap photograph from the corresponding original selected-SKU image. Application, closed-end and collar-detail photographs are original PPF series references. Tubing shown in application pictures is not included.

Model & Reference Codes

Original shipping SKU	PPF-10
Accepted tube OD	10 mm
Approximate overall height	23 mm
Product type	Closed-end push-in pneumatic tube cap
Construction	Black polymer body, blue release collar and metal retaining ring
Sales unit	1 complete assembled push-in tube end cap

Tube OD is the outside diameter of the tube accepted by the cap, not the outside diameter of the cap body. Height follows the selected original supplier SKU card and is approximate.

Insert the tube and inspect.

Isolate and fully depressurize the air supply. Match tube OD, cut the tube square and remove debris. Insert the tube fully into the cap and pull gently to check retention. Restore air gradually and leak-check the joint. For removal, fully depressurize, press the cap release collar and withdraw the tube. Follow the actual system operating limits; do not disconnect under pressure.